運行過程中的工業清洗機，水是利用入口閥直接進入到洗滌槽內，然后由壓力泵利用噴嘴進行噴射清洗，如果設備需要被加熱使用的話，那么在輸出的裝置設計中，利用油箱的方式進行加熱即可，所以，當工業清洗機運行出現故障的話，基本和加熱的因素存在直接關系，因?yàn)樵O(shè)備如果沒有零件的情況下，那么異常問題也不會出現，在將螺釘進行擰緊之后，若沒有發現部件存在損壞的現象，那么則需要將部件進行更換。

During the operation of an industrial cleaning machine, water is directly fed into the washing tank through the inlet valve, and then sprayed by a pressure pump using a nozzle for cleaning. If the equipment needs to be heated for use, the output device design can use the oil tank for heating. Therefore, if an industrial cleaning machine malfunctions during operation, it is basically directly related to the heating factor, because if the equipment does not have parts, So abnormal problems will not occur. After tightening the screws, if no damage is found to the components, then the components need to be replaced.

清洗任何部件的時候，都只可以使用普通的清潔型自來水，為了有效的工業清洗機的性能不被破壞，如果自來水供應不足的話，需要對進水閥進行檢查，檢查是否有異物堵塞進水閥，其次是對噴嘴進行清潔處理，確保進水不受影響。若選用的是自帶加熱效果的清潔器，是對油液的清潔度進行檢查，主要是檢查盒子的底部是否存在粉末或者是鐵屑等雜質，還有是沉積物造成進水閥出現堵塞。

When cleaning any component, only regular clean tap water can be used. In order to effectively prevent the performance of the industrial cleaning machine from being damaged, if the tap water supply is insufficient, the inlet valve needs to be checked first to see if there are foreign objects blocking the inlet valve. Secondly, the nozzle needs to be cleaned to ensure that the inlet water is not affected. If a self-cleaning device with built-in heating effect is selected, the first step is to check the cleanliness of the oil, mainly to check if there are impurities such as powder or iron filings at the bottom of the box, and if sediment causes blockage of the inlet valve.

我們?cè)趯?duì)工業清洗機進行操作的過程中，必須嚴格按照清洗的標準要求來進行操作，如果不按照規定操作的話，有可能會導致工業清洗機無法正常工作，將熱水進行關閉，等熱水完全冷卻之后，在將設備開啟進行工作，必須機械完全失去熱量之后才可以。對工業清洗機的軟管進行檢查，因?yàn)轭l繁的使用到洗滌劑導致軟管老化，還有噴嘴是不是存在異物堵塞，以及過濾器堵塞與否的檢查工作，如果高壓管外部的電線發生嚴重磨損或者是破裂的話，也會對工業清洗機的運行造成嚴重的影響。

In the process of operating the industrial cleaning machine, we must strictly follow the cleaning standards. If we do not follow the regulations, it may cause the industrial cleaning machine to not work properly. First, turn off the hot water, wait for the hot water to completely cool down, and then turn on the equipment to work. Only after the mechanical heat is completely lost can we proceed. Inspect the hoses of industrial cleaning machines, as frequent use of detergents can cause hose aging, as well as check whether there are foreign objects blocking the nozzle and whether the filter is blocked. If the wires outside the high-pressure pipe are severely worn or ruptured, it can also have a serious impact on the operation of the industrial cleaning machine.

日常對工業清洗機的保養維護工作也是必不可少的，主要是確保每次操作前水流都處于穩定狀態，箱體相互之間的連接是不是都正常，箱體內部是否出現雜質，電機和過濾器要定期檢查和清理，避免有碎屑的進入影響設備運行，還有是砂帶有沒有出現破裂。不管是日常的檢查，還是定期的維護，都要落實到位，不僅為了確保工業清洗機可以更好的運行，也是為了降低日常運行過程中出現故障的可能性。

The daily maintenance and upkeep of industrial cleaning machines is also essential, mainly to ensure that the water flow is in a stable state before each operation, whether the connections between the boxes are normal, whether there are impurities inside the boxes, and whether the motor and filter should be regularly inspected and cleaned to avoid debris entering and affecting equipment operation, as well as whether the sand belt has broken. Whether it is daily inspection or regular maintenance, it must be implemented in place, not only to ensure better operation of industrial cleaning machines, but also to reduce the possibility of malfunctions during daily operation.