Any equipment will have some common failures in the process of use, so does the ultrasonic cleaner. Operators should know about these common failures and know how to repair them.

1、換能器損壞

1. Damaged transducer

一般來說，超聲波清洗機在長時間處于正常開機或者是使用的狀態下，清洗機體內的溫度必然上升，換能器部位的膠體部分會被熔化、脫落或者斷裂。作為操作者，應該進行定期檢查，及時更換損壞的換能器。

Generally speaking, when the ultrasonic cleaner is normally started or used for a long time, the temperature inside the cleaner will inevitably rise, and the colloid part of the transducer will be melted, fallen off or broken. As an operator, you should conduct regular inspection and replace damaged transducers in time.

2、保險損壞

2. Insurance damage

打開超聲波清洗機的電源之后，如果設備沒有任何反應，這種情況下，很可能是電源內的插座保險出現了損壞，要及時檢查維修。

After turning on the power supply of the ultrasonic cleaner, if the equipment does not respond, it is likely that the socket fuse in the power supply is damaged, and it should be checked and repaired in time.

3、功能管損壞

3. The function tube is damaged

長時間不停機的處于工作狀態，或者說清洗機放入的清洗劑太少，這些都會導致功能管損壞。

If the machine is in working condition without stopping for a long time, or the detergent put in by the cleaner is too little, the function pipe will be damaged.

以上就是小編與大家分享的超聲波清洗機的常見故障，一旦出現這些故障，操作人員一定要要進行及時處理。

The above are the common failures of the ultrasonic cleaning machine that Xiaobian shared with you. Once these failures occur, the operators must deal with them in a timely manner.

以上就是為大家介紹的有關超聲波清洗設備的詳細的介紹,希望對您有所幫助.如果您有什么疑問的話,歡迎聯系我們.我們將以的態度,為您提供服務http://www.zzcsgy.cn

The above is a detailed introduction to the ultrasonic cleaning equipment, and we hope it will be helpful to you. If you have any questions, please contact us. We will provide you with professional services http://www.zzcsgy.cn